Mapdl.dldele(line='', lab='', **kwargs)#

Deletes DOF constraints on a line.



Line for which constraints are to be deleted. If ALL, delete for all selected lines [LSEL]. If LINE = P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted for LINE


Constraint label:

ALL - All constraints.

SYMM - Symmetry constraints.

ASYM - Antisymmetry constraints.

UX - Displacement in X direction.

UY - Displacement in Y direction.

UZ - Displacement in Z direction.

ROTX - Rotation about X axis.

ROTY - Rotation about Y axis.

ROTZ - Rotation about Z axis.

WARP - Warping magnitude.

PRES - Pressure.

TEMP, TBOT, TE2, TE3, …, TTOP - Temperature.

VOLT - Electric scalar potential.

AX - Magnetic vector potential in X direction.

AY - Magnetic vector potential in Y direction.

AZ - Magnetic vector potential in Z direction.

CONC - Concentration.


Deletes the degree of freedom constraints (and all corresponding finite element constraints) on a line previously specified with the DL command. See the DDELE command for delete details.

Warning:: : On previously meshed lines, all constraints on affected nodes will also be deleted, whether or not they were specified by the DL command.

This command is also valid in PREP7.