djdele

FeConstraints.djdele(elem='', lab='', **kwargs)

Deletes boundary conditions on the components of relative motion of a joint element.

Mechanical APDL Command: DJDELE

Parameters:

elemstr

Element number or ALL. ALL (or leaving this field blank) will delete all joint element boundary conditions specified by LAB.

labstr

Valid labels are:

• UX - Displacement in local x direction.

• UY - Displacement in local y direction.

• UZ - Displacement in local z direction.

• ROTX - Rotation about local x axis.

• ROTY - Rotation about local y axis.

• ROTZ - Rotation about local z axis.

• VELX - Linear velocity in local x direction.

• VELY - Linear velocity in local y direction.

• VELZ - Linear velocity in local z direction.

• OMGX - Angular velocity in local x direction.

• OMGY - Angular velocity in local y direction.

• OMGZ - Angular velocity in local z direction.

• ACCX - Linear acceleration in local x direction.

• ACCY - Linear acceleration in local y direction.

• ACCZ - Linear acceleration in local z direction.

• DMGX - Angular acceleration in local x direction.

• DMGY - Angular acceleration in local y direction.

• DMGZ - Angular acceleration in local z direction.

• ALL, or (blank) - Delete all applied boundary conditions.

Notes

This command is valid for MPC184 joint elements. See dj for information on specifying boundary conditions on the components of relative motion of a joint element.