secjoint#

Mapdl.secjoint(kywrd='', val1='', val2='', val3='', val4='', val5='', val6='', **kwargs)#

Defines local coordinate systems at joint element nodes and other data

APDL Command: SECJOINT for joint elements.

Parameters:
kywrd

Keyword that indicates the type of joint element data being defined.

LSYS or blank - Define local coordinate systems at the nodes that form the MPC184 joint

element.

RDOF - Define the relative degrees of freedom to be fixed for an MPC184-General joint

element.

PITC - Define the pitch of an MPC184-Screw joint element.

FRIC - Define the geometric quantities required for Coulomb frictional behavior in the

MPC184-Revolute or MPC184-Translational joint element.

val1, val2, val3, val4, val5, val6

The meaning of Val1 through Val6 changes, depending on the value of Kywrd.

Notes

Use this command to define additional section data for MPC184 joint elements. To overwrite the current values, issue another SECJOINT command with the same Kywrd value. The data input on this command is interpreted based on the most recently issued SECTYPE command.