ansys.mapdl.core.Mapdl.desol#
- Mapdl.desol(elem='', node='', item='', comp='', v1='', v2='', v3='', v4='', v5='', v6='', **kwargs)#
Defines or modifies solution results at a node of an element.
Mechanical APDL Command: DESOL
- Parameters:
- elem
str
Element number for which results are defined or modified. If ALL, apply to all selected elements ( esel ).
- node
str
Node of element (actual node number, not the position) to which results are specified. If ALL, specify results for all selected nodes ( nsel ) of element. If
NODE
= P, graphical picking is enabled and all remaining command fields are ignored (valid only in the GUI). A component name may also be substituted forNODE
.- item
str
Label identifying results. Valid item labels are shown in DESOL - Valid Item and Component Labels below. Some items also require a component label (
Comp
).- comp
str
Component of the item (if required); see DESOL - Valid Item and Component Labels.
- v1
str
Additional values (if any) assigned to the remaining components (in the order corresponding to the
Comp
list shown below) for the specifiedItem
(starting from the specifiedComp
label and proceeding to the right).- v2
str
Additional values (if any) assigned to the remaining components (in the order corresponding to the
Comp
list shown below) for the specifiedItem
(starting from the specifiedComp
label and proceeding to the right).- v3
str
Additional values (if any) assigned to the remaining components (in the order corresponding to the
Comp
list shown below) for the specifiedItem
(starting from the specifiedComp
label and proceeding to the right).- v4
str
Additional values (if any) assigned to the remaining components (in the order corresponding to the
Comp
list shown below) for the specifiedItem
(starting from the specifiedComp
label and proceeding to the right).- v5
str
Additional values (if any) assigned to the remaining components (in the order corresponding to the
Comp
list shown below) for the specifiedItem
(starting from the specifiedComp
label and proceeding to the right).- v6
str
Additional values (if any) assigned to the remaining components (in the order corresponding to the
Comp
list shown below) for the specifiedItem
(starting from the specifiedComp
label and proceeding to the right).
- elem
Notes
The desol command defines or modifies solution results in the database at a node of an area or volume element. For example, desol,35,50,S,X,1000,2000,1000 assigns values 1000, 2000, and 1000 to SX, SY, and SZ (respectively) of node 50 of element 35.
The settings of the POST1 force, shell, and layer commands, if applicable, further specify which database items are affected.
For layered composite shells, specify the current element layer ( layer ) before issuing the desol command.
All data is stored in the solution coordinate system but is displayed in the results coordinate system ( rsys ). To list the current results, use the presol command.
Modified solution results are not saved automatically. To save separate records of modified results, use either the rappnd or lcwrite command.
Result items are available depending on element type; check the individual element for availability. Valid item and component labels for element results are:
DESOL - Valid Item and Component Labels#
Item
Comp
Description
ELEM
Element number.
S
X, Y, Z, XY, YZ, XZ
Component stress.
EPEL
X, Y, Z, XY, YZ, XZ
Component elastic strain.
EPTH
X, Y, Z, XY, YZ, XZ
Component thermal strain.
EPPL
X, Y, Z, XY, YZ, XZ
Component plastic strain.
EPCR
X, Y, Z, XY, YZ, XZ
Component creep strain.
EPSW
Swelling strain.
NL
SEPL
Equivalent stress (from stress-strain curve).
“
SRAT
Stress state ratio.
“
HPRES
Hydrostatic pressure.
“
EPEQ
Accumulated equivalent plastic strain.
“
PSV
Plastic state variable.
“
PLWK
Plastic work/volume.
SEND
ELASTIC
Elastic strain energy density.
“
PLASTIC
Plastic strain energy density.
“
CREEP
Creep strain energy density.
TG
X, Y, Z
Component thermal gradient.
TF
X, Y, Z
Component thermal flux.
PG
X, Y, Z
Component pressure gradient.
EF
X, Y, Z
Component electric field.
D
X, Y, Z
Component electric flux density.
H
X, Y, Z
Component magnetic field intensity.
B
X, Y, Z
Component magnetic flux density.
CG
X, Y, Z
Concentration gradient
DF
X, Y, Z
Diffusion flux density
FMAG
X, Y, Z
Component electromagnetic force.
F
X, Y, Z
X, Y, or Z structural force.
M
X, Y, Z
X, Y, or Z structural moment.
HEAT
Heat flow.
FLOW
Fluid flow.
AMPS
Current flow.
FLUX
Magnetic flux.
CSG
X, Y, Z
X, Y, or Z magnetic current segment component.
RATE
Diffusion flow rate