Special purpose

These POST1 commands are used for various special purposes.

Mapdl.bfint([fname1, ext1, fname2, ext2, ...])	Activates the body force interpolation operation.
Mapdl.cbdof([fname1, ext1, fname2, ext2, ...])	Activates cut-boundary interpolation (for submodeling).
Mapdl.cmsfile([option, fname, ext, cmskey])	Specifies a list of component mode synthesis (CMS) results files for
Mapdl.cyccalc([fileprefix, fileformat])	Calculates results from a cyclic harmonic mode-superposition analysis
Mapdl.cycfiles([fnamerst, extrst, ...])	Specifies the data files where results are to be found for a cyclic
Mapdl.cycphase([type_, option])	Provides tools for determining minimum and maximum possible result
Mapdl.cycspec([label, node, item, comp])	Defines the set of result items for a subsequent CYCCALC command in
Mapdl.exoption([ldtype, option, value])	Specifies the EXPROFILE options for the Mechanical APDL to ANSYS CFX profile file transfer.
Mapdl.expand([nrepeat, hindex, icsys, ...])	Displays the results of a modal cyclic symmetry analysis.
Mapdl.exprofile([ldtype, load, value, ...])	Exports interface loads or loads on selected nodes to an ANSYS CFX
Mapdl.exunit([ldtype, load, untype, name])	Specifies the interface load unit labels to be written to the export
Mapdl.fssparm([port1, port2])	Calculates reflection and transmission properties of a frequency
Mapdl.fsum([lab, item])	Sums the nodal force and moment contributions of elements.
Mapdl.hfang([lab, phi1, phi2, theta1, theta2])	Defines or displays spatial angles of a spherical radiation surface for
Mapdl.hfsym([kcn, xkey, ykey, zkey])	Indicates the presence of symmetry planes for the computation of
Mapdl.intsrf([lab])	Integrates nodal results on an exterior surface.
Mapdl.kcalc([kplan, mat, kcsym, klocpr])	Calculates stress intensity factors in fracture mechanics analyses.
Mapdl.nforce([item])	Sums the nodal forces and moments of elements attached to nodes.
Mapdl.nldpost([label, key, fileid, prefix])	Gets element component information from nonlinear diagnostic files.
Mapdl.plcamp([option, slope, unit, freqb, ...])	Plots Campbell diagram data for applications involving rotating
Mapdl.plcfreq([spec, sectbeg, sectend])	Plots the frequency response for the given CYCSPEC specification.
Mapdl.plchist([spec, freqpt])	Plots a histogram of the frequency response of each sector for the
Mapdl.plfar([lab, option, phi1, phi2, nph1, ...])	Plots pressure far fields and far field parameters.
Mapdl.plmc([lstep, sbstep, timfrq, kimg, ...])	Plots the modal coordinates from a mode-superposition solution.
Mapdl.plnear([lab, opt, kcn, val1, val2, ...])	Plots the pressure in the near zone exterior to the equivalent source
Mapdl.plzz([rotvel, deltarotvel])	Plots the interference diagram from a cyclic modal analysis.
Mapdl.pras([quantity, loadstep, substep])	Calculates a specified acoustic quantity on the selected exterior
Mapdl.prcamp([option, slope, unit, freqb, ...])	Prints Campbell diagram data for applications involving rotating
Mapdl.prfar([lab, option, phi1, phi2, nph1, ...])	Prints pressure far fields and far field parameters.
Mapdl.prnear([lab, opt, kcn, val1, val2, ...])	Prints the pressure in the near zone exterior to the equivalent source
Mapdl.reswrite([fname, cflag])	Appends results data from the database to a results file.
Mapdl.rmflvec(**kwargs)	Writes eigenvectors of fluid nodes to a file for use in damping
Mapdl.rsplit([option, label, name1, name2, ...])	Creates one or more results file(s) from the current results file based
Mapdl.rstmac([file1, lstep1, sbstep1, ...])	APDL Command: RSTMAC
Mapdl.spoint([node, x, y, z])	Defines a point for moment summations.
Mapdl.spmwrite([method, nmode, inputs, ...])	Calculates the state-space matrices and writes them to the SPM file.