edpc#
- Mapdl.edpc(min_='', max_='', inc='', **kwargs)#
Selects and plots explicit dynamic contact entities.
APDL Command: EDPC
- Parameters:
- min_
Minimum contact entity number to be selected and plotted (default = 1).
- max_
Maximum contact entity number to be selected and plotted (default = MIN).
- inc
Contact entity number increment (default = 1).
Notes
EDPC invokes an ANSYS macro which selects and plots explicit dynamic contact entities. The plot will consist of nodes or elements, depending on the method (node components or parts) that was used to define the contact surfaces (see the EDCGEN command). For single surface contact definitions, all external surfaces within the model are plotted.
Note:: : EDPC changes the selected set of nodes and elements. After plotting contact entities, you must reselect all nodes and elements (NSEL and ESEL) required for subsequent operations, such as SOLVE
Use the EDCLIST command to list the contact entity numbers for all defined contact.
This command is also valid in SOLUTION.
Distributed ANSYS Restriction: This command is not supported in Distributed ANSYS.