erinqr#

Mapdl.erinqr(key, pname='__tmpvar__', **kwargs)#

Obtain information from common errors.

Warning

DISCLAIMER: This function is un-documented in the official ANSYS Command Reference Guide. Hence its support is limited and it use is not encouraged. Please use it with caution.

Parameters:
keyint

Item to be returned.

  • 1 = keyerr (ER_ERRORFLAG)

    Master error flag.

  • 2 = errfil (ER_ERRORFILE)

    Errors file unit number.

  • 3 = numnot (ER_NUMNOTE)

    Total number of notes displayed.

  • 4 = numwrn (ER_NUMWARNING)

    Total number of warnings displayed.

  • 5 = numerr (ER_NUMERROR)

    Total number of errors displayed.

  • 6 = numfat (ER_NUMFATAL)

    Total number of fatals displayed.

  • 7 = maxmsg (ER_MAXMESSAGE)

    Max allowed number of displayed messages before abort.

  • 8 = lvlerr (ER_ERRORLEVEL)

    Used basically in solution (from cnvr command.)

    • -1 = do not set keyerr for notes/errors/warnings.

    • -2 = same as -1 but do not display message either.

  • 9 = mxpcmd (ER_MAXCOMMAND)

    Maximum number of messages allowed per command.

  • 10 = nercmd (ER_NUMCOMMAND)

    Number of messages displayed for any one command.

  • 11 = nertim (ER_UICLEAR)

    Key as to how message cleared from u/i pop-up (only for “info” calls)

    • -1 = message is timed before removal

    • 0 = message needs pick or keyboard before removal

    • 1 = message stays up until replaced by another message

  • 12 = nomore (ER_NOMOREMSG)

    Display no more messages

    • 0 = display messages

    • 1 = display discontinue message and stop displaying

  • 13 = eropen (ER_FILEOPEN)

    • 0 = errors file is closed

    • 1 = errors file is opened

  • 14 = ikserr (ER_INTERERROR)

    • 0 = if interactive do not set keyerr.

    • -1 = if interactive set keyerr (used by mesher and tessalation)

  • 15 = kystat (ER_KEYOPTTEST)

    Flag to bypass keyopt tests in the elcxx routines associated with status/panel info inquiries.

    • 0 = do not bypass keyopt tests

    • 1 = perform all keyopt tests also flag to bypass setting of _STATUS upon resume

  • 16 = mxr4r5 (ER_MIXEDREV)

    Mixed rev4-rev5 input logic (*do, *if , *go , *if-go)

    • 1 = rev5 found (*do, *fi-then-*endif)

    • 2 = rev4 found (*go, :xxx , *if, …., :xxx)

    • 3 = warning printed. do not issue any more.

  • 17 = mshkey (ER_MESHING)

    CPU intensive meshing etc. This will cause nertim (11) to be set to -1 for “notes”, 1 for “warnings”,and 0 for “errors”. Checking of this key is done in anserr.

    • 0 = not meshing or cpu intensive

    • 1 = yes, meshing or cpu intensive

  • 18 = syerro (18)

    Systop error code. read by anserr if set.

  • 19 = opterr (ER_OPTLOOPING)

    • 0 = no error in main ansys during opt looping

    • 1 = an error has happened in main ansys during opt looping

  • 20 = flowrn (20)

    Flag used by “floqa” as to list floqa.ans.

    • 0 = list floqa.ans

    • 1 = floqa.ans has been listed. do not list again.

  • 22 = noreport (22)

    Used in GUI for turning off errors due to strsub calls.

    • 0 = process errors as usual

    • 1 = do NOT report errors

  • 23 = pdserr (ER_PDSLOOPING)

    • 0 = no error in main ansys during pds looping

    • 1 = an error has happened in main ansys during pds looping

  • 24 = mxpcmdw (24)

    Number of messages written to file.err for any command

    • 0 = write all errors to file.err

    • 1 = only write displayed errors to file.err

  • 25 = kystop

    No information is provided.

  • 26 = icloads (26)

    Key to forbid the iclist command from listing solution data instead of the input data.

    • 0 = iclist is OK

    • 1 = do not permit iclist

  • 27 = ifkey error (27)

    key on whether or not to abort during /input on error.

    • 0 = do not abort

    • 1 = abort

  • 28 = intrupt (ER_INTERRUPT)

    Interrupt button, so executable returns no error.

  • spare - spare integer variables

pnamestr

Name of the variable where the queried value is stored.

**kwargs

Extra arguments to be passed to Mapdl.run.

Returns:
int or str

Value corresponding to key.