Meshing#
These PREP7 commands are used to mesh solid models with nodes and elements.
|
Concatenates multiple areas in preparation for mapped meshing. |
|
Deletes nodes and area elements associated with selected areas. |
|
Specifies the element size to be meshed onto areas. |
|
Generates a 2-D mapped mesh based on specified area corners. |
|
Generates nodes and area elements within areas. |
|
Refines the mesh around specified areas. |
|
Checks area and volume entities for previous meshes. |
|
Clears meshed entities. |
|
Couples the two side faces of a cyclically symmetric model for loading that are the same on every segment. |
|
Edits or clears cohesive zone sections. |
|
Create and mesh an interface area composed of cohesive zone elements. |
|
Controls default element sizes. |
|
Reorients solid element normals. |
|
Refines the mesh around specified elements. |
|
Specifies the default number of line divisions. |
|
Sets the element coordinate system attribute pointer. |
|
Generates nodes and tetrahedral volume elements from detached exterior |
|
Specifies the reference point and defines the geometry in the fiber |
|
Generates nodes and interface elements along lines or areas. |
|
Associates attributes with the selected, unmeshed keypoints. |
|
Deletes nodes and point elements associated with selected keypoints. |
|
Specifies the edge lengths of the elements nearest a keypoint. |
|
Generates nodes and point elements at keypoints. |
|
Refines the mesh around specified keypoints. |
|
Specifies a keypoint about which an area mesh will be skewed. |
|
Associates element attributes with the selected, unmeshed lines. |
|
Concatenates multiple lines into one line for mapped meshing. |
|
Deletes nodes and line elements associated with selected lines. |
|
Specifies the divisions and spacing ratio on unmeshed lines. |
|
Generates nodes and line elements along lines. |
|
Refines the mesh around specified lines. |
|
Sets the element material attribute pointer. |
|
Checks mesh connectivity. |
|
Controls the relationship of the solid model and the FE model. |
|
Specifies meshing options. |
|
For elements that support multiple shapes, specifies the element shape |
|
Simplifies the generation of meshes that have matching node element |
|
Specifies whether free meshing or mapped meshing should be used to mesh |
|
Specifies placement of midside nodes. |
|
Specifies pattern to be used for mapped triangle meshing. |
|
Refines the mesh around specified nodes. |
|
Create and mesh a pretension section |
|
Sets the element real constant set attribute pointer. |
|
Defines variable thickness at nodes for shell elements. |
|
Controls element shape checking. |
|
Specifies meshing parameters for automatic (smart) element sizing. |
|
Converts 20-node degenerate tetrahedral elements to their 10-node non- |
|
Improves the quality of tetrahedral elements that are not associated |
|
Sets the element type attribute pointer. |
|
Associates element attributes with the selected, unmeshed volumes. |
|
Deletes nodes and volume elements associated with selected volumes. |
|
Improves the quality of the tetrahedral elements in the selected |
|
Generates nodes and volume elements within volumes. |
|
Specifies brick element orientation for volume mapped (hexahedron) |
|
Fills an existing unmeshed volume with elements by sweeping the mesh |